Functions and features
1.This product is an PIR sensor switch , it usually installed in thepublic placeor the corri dor of house, in the conditionof weak light,when people arri ve, it turns on:when peopleleave, it turns off with delay.
2.When the light is bright enough, it will not turns on,it is energy saving.
3.It can be used in alarm system, if we install it in theforbiddenarea, the alarming dell will ring when someone invades into the area.
4.it also can be used in corri dor, stair hall, balcony,washroom,garage, etc.

Specification
1.operating power supply:110VAC~1800VAC
2.capabitity of load:800w
3.environment temperature:-10C~40C
4.delay time:30~300(adjustable)
5.detecting distance:<12m, detecting angle:180
6.lighting detecting range:101ux(adjustable)
7.height of installtion:1.4-1.6m

Attentions
1.Install foll owing the wiring diagram, after the careful check, connect the power supply.40
~80seconds is needed for preheat.
2.If you need it to induct in daylight, you need to adjust it tod aylight induction mode.
3.Detec ting will be affected by the environment and othe r fac tors , such as, temperature , walking speed, cloth, etc.
4.in order to keep the high sensitivity, please do not install the product instrong light environment
and where there is strong cold or heat airflow.
5.This device have the function of repeat triggering, when peole in the detecting area,triggering the switch, the device will restart the delay time, so the delay time should be calculated on the last triggering.